In the event of a vaginal mycosis, please do the following:
Do not use the sensor while you suffer from mycosis.
You must first completely cure the mycosis with the help of your gynaecologist.
Before you insert the sensor again for the first time after a mycosis, you must disinfect it thoroughly with 70% isopropyl alcohol and then rinse it thoroughly with water. Please also disinfect its storage box and station. When using isopropyl alcohol, please refer to the instructions for use of the product.
Please note: Over the entire two-year or two and a half year life cycle of the sensor, you must not perform this procedure more than twenty times.